Air Support

DSC01336

DSC01337

Found this little guy while looking for balsa wood at Hobby Lobby. The cost was a whopping $7.99. It looked like the right scale for RedActions, although the headrest is a tip-off that this piece of decor is really based on a Boeing F4-B fighter of the 1930’s.

The scale might be a 1/48, and therefore a little large for 25-28mm. Using a figure as a type of measuring stick, I was able to estimate the little guy’s dimensions and check it against some info on planes of the late 1920s and 1930s. It’s definately in the ballpark. So, there’s a little era problem.

I do need to cut off the spats and replace the front tires as they are way too big. The rear skid needs to be cut down, and the cockpit is too big, but I’m not going to sweat that.  On second thought, maybe remove the headrest and make room for an observer/gunner.  This might mitigate the size problem.

It will have to be painted. My table isn’t ready for a Yellow Peril.

Leave a Reply

Your email address will not be published. Required fields are marked *